Thiết bị định vị hàng hải Koden KGP-913MKII

HighMark Security trân trọng giới thiệu thiết bị định vị hàng hải Koden KGP-913:

Độ chính xác cao nhỏ gọn và dễ dàng sử dụng.
Với tất cả các tính năng này, KGP-913/913D là lý tưởng cho tàu thuyền đánh cá

– Bộ nhớ 400 điểm, bộ nhớ vết 2000

– Lập trình 20 tuyến đường.
– Các kiểu màn hình: NAV1, NAV2, NAV3, PLOT, MOB
– Điện áp nguồn: 11-40VDC.

 
 KODEN KGP-913/913D SPECIFICATIONS GPS RECEIVER Receiving Frequency 1575.42 MHz + 1MHz Receiving Channel Parallel “MaxView” tracks 11 satellites Receiving Code Receiving Code Sensitivity Better than –130dBm (elevation angle: 5 or over) Tracking Speed 200 knots maximum Accuracy (at HDOP 3 or less by C/A code) Position:  2 to 10 meters RMS*(DGPS On), 15 meters  (with DGPS Off)
Velocity:  0.1 knot RMS (DGPS On) Note: Accuracy is subject to change in accordance with DOD civil GPS user policy. DGPS RECEIVER Receiving Frequency 283.5 to 325.0 kHz Channel Separation 500 Hz step Modulation MSK: 50, 100, 200 bit/second Sensitivity 2.5 ¥V/m Signal Detection (S/N) Better than 6 dB Dynamic Range 92 dB GPS/DGPS DISPLAY Display LCD backlit by electroluminescent cell (128 x 64 pixels) Display Modes NAV1, NAV2, NAV3, PLOT, MOB, MENU Track Display Display Range: 0.025, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20 nm (sm, km) Usable Ground: Within 80 in latitude Plotting Interval: 10, 20, 30 seconds, 1, 3, 5 minutes, 0.1, 0.5 nm (sm, km) Plotting Capacity: 2000 points Position Data Display Latitude/longitude in increments of 1/1000 minute, converted Loran C LOP, Loran A LOP or Decca LOP Navigation Displays Speed, course, velocity made good/course made good/elapsed time, altitude, distance/bearing/ cross-track error/CDI/time to go to waypoint, total time to go and distance on route, DOP value, present time (UTC or LTC), satellite status, beacon receiving status, distance/bearing between two points, MOB display Waypoint/Event Memory A total of 400 waypoints with alphanumeric identifiers Route Memory 20 routes of 20 waypoints each (reversible) Position Update Every second Alarms Position Compensation Latitude/Longitude, Loran C LOP, Loran A LOP, Decca LOP or Datum Magnetic Compensation Auto or manual Parameters Loran C LOP/Loran A LOP/Decca LOP conversion, memory of waypoints and name (up to 10 letters), selection of measuring unit (nm, km, sm), antenna height, averaging (smoothing) factor, positioning mode (2D or 3D automatic selection), selection and registration of beacon station Input Data Format NMEA 0183, NMEA 0183, RTCM SC-104 Output Data Format NMEA 0183, (AAM, APB, BOD, BWC, DCN,  GGA, GLC, GLL, GSA, GSV, GTD, MSS, ODA, RMB, RMC, RNN, SGR, SNU, VTG, WDC, WPL, XTE and ZDA), NMEA1, NMEA2, CIF, SHIPMATE 0183 (GPS-90: NMEA-0183 Only) Memory Protection Memory Protection Power Requirements 11~ 40V DC, less than 5W Operating Temperature Display Unit: 5°to 131°F (-15°to +55°C) Antenna Unit: -22°to 131°F (-25°to +55°C) DGPS DISPLAY Differential On, Off, Auto Beacon Station Selection Auto (requires position information) or manual Beacon Station Selection User entry (20 stations), beacon almanac data (10 stations), ROM (built-in stations around the world) Operating Temperature Antenna Coupler: -22 to 131 F (25 to +55 C) Case Dimensions 7.5″W x 4.75″H x 2.7″D

Viết một bình luận